Distributor ID: Ubuntu
Description: Ubuntu 10.04.1 LTS
Release: 10.04
Codename: lucid
Linux 2.6.32-24-generic-pae
Цитата
pgw000@pgw000i:~$ dmesg
.............
8 name="/usr/bin/evince-previewer"
[ 15.896358] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
[ 15.952168] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
[ 15.952649] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.594550] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 17.594556] 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 17.594680] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.456031] eth0: no IPv6 routers present
[1399.199336] usbserial: `0?05c6' invalid for parameter `vendor'
[ 2312.430507] usbserial: `0?05c6' invalid for parameter `vendor'
[ 2328.127095] usbserial: `0?05c6' invalid for parameter `vendor'
Цитата
pgw000@pgw000i:~$ dmesg | tail
[ 15.896358] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
[ 15.952168] e1000e 0000:02:00.0: irq 26 for MSI/MSI-X
[ 15.952649] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 17.594550] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
[ 17.594556] 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 17.594680] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.456031] eth0: no IPv6 routers present
[ 1399.199336] usbserial: `0?05c6' invalid for parameter `vendor'
[ 2312.430507] usbserial: `0?05c6' invalid for parameter `vendor'
[ 2328.127095] usbserial: `0?05c6' invalid for parameter `vendor'
Цитата
pgw000@pgw000i:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 05c6:3900 Qualcomm, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Цитата
pgw000@pgw000i:~$ sudo modprobe usbserial vendor=0?05c6 product=0?3900
FATAL: Error inserting usbserial (/lib/modules/2.6.32-24-generic-pae/kernel/drivers/usb/serial/usbserial.ko): Invalid argument
pgw000@pgw000i:~$
вот такая вот проблемма!